luster
- 论坛博士后
- 636
- 636
- 2007-06-05
|
1#
t
T
发表于 2010-09-07 17:12
|只看楼主
PIONEER先锋HPM-100大型监听书架箱,此箱是日本先锋与JBL设计师合作设计的巅峰时期产品,声音通透饱满,自然准确,频响宽动态大而且效率高,是对不错的监听级音箱,而且成色品相很好(实物如图),全部单元状态一切正常无修摩,每只箱子重量接近60斤,故此不作发货,只接受自提(箱子在广东中山),欢迎上门试听看货 4300有意请电:13631181133 杨 Pioneer HPM-100 | | 62,000yen(one-set, around the 1977 time) |
The 4 ways speaker system which adopted the diaphragm by a high polymer element.
A carbon fiber mixing cone is used for the cone paper of a Woofer, and also the special sound dumping agent is coated in the top layer. Moreover, the frame holding a diaphragm and a magnet is a product made from firm aluminum die-casting. The design which stops a higher-harmonic distorted component with a long voice coil, the copper cap of a large-sized magnet and a center pole, etc. is carried out to the magnetic circuit.
A squawker thinks a directivity as important, and does not make it a large diameter, but the cone type of 10cm is being used for it. A diaphragm is the lightweight cone paper which improved the rigidity developed newly. In a magnetic circuit, the large improvement in efficiency is aimed at with a large-sized magnet and an edgewise volume voice coil, and distortion is reduced to the center pole using a copper cap.
While attaining a stabilization of a property in a tweeter at a frame using aluminum die-casting, the adhesives of the epoxy system are used for the adhesion of a voice coil assembly and cone paper.
The unique piezoelectric type speaker which uses a high polymer element for a diaphragm is adopted as a super tweeter. This high polymer has many special features, such as vibration system is "lightweight", "a directivity being good since it is a complete drive type", there "there being little disorder of the property by vibration", and "the Dainyuu power being borne."
The enclosure has adopted the bass-reflex type. Moreover, a simple circuitry form which adopted MP type capacitor with few losses in a network, and thought the phase response as important is taken.
|
Scheme | 4 ways, 4 speaker bass-reflex scheme, and a bookshelf type | Using unit | For low-pass: 30cm cone type For mid ranges: 10cm cone type For high regions: 4.5cm cone type For high super regions: High polymer type | Impedance | 8ohm | Play frequency band | 30Hz - 25000Hz | Output sound pressure level | 92.5dB/W/m | The maximum input | 100W | Cross over frequency | 3000Hz, 4000Hz, 12000Hz | Dimensions | Width 390x height 670x depth of 393mm | Weight | 26.7kg |
|
-
-
DSC03931.JPG
(, 下载次数:0)
jpg(2010/9/7 18:49:01 上传)
-
-
DSC03836.JPG
(, 下载次数:0)
jpg(2010/9/7 18:49:01 上传)
-
-
DSC03934.JPG
(, 下载次数:0)
jpg(2010/9/7 18:49:01 上传)
-
-
DSC03844.JPG
(, 下载次数:0)
jpg(2010/9/7 18:49:01 上传)
-
-
DSC03894.JPG
(, 下载次数:0)
jpg(2010/9/7 18:49:01 上传)
-
-
DSC03862.JPG
(, 下载次数:0)
jpg(2010/9/7 18:49:01 上传)
|