发烧论坛

注册

 

发新话题 回复该主题

【原创】我给大家介绍一套2万元英国Linn的hifi搭配! [复制链接]

查看: 13357|回复: 41
1#

brucelee 在 2003-11-10 8:31:49 发表的内容
beacon 在 2003-11-9 22:42:47 发表的内容
Linn classik:
[upload=jpg]uploadImages/200311922421837652.jpg[/upload]


图贴错了,这是av合并机。



应该是这个:
[upload=jpg]uploadImages/200311102117826050.jpg[/upload]

Technical Specifications


Introduced  2001


Dimensions  H 80mm x W 320mm x D 325mm

H 3.1 inches x W 12.6 inches x D 12.8 inches


Weight  6kg

13.23lbs


Power consumption   325W maximum in normal operating mode

25W typical use

<7W in standby


Mains supply  100V, 115V or 230V versions available

Nominal voltage +/- 10%


Distributed audio  4 x RJ45 sockets


Tuner  FM Aerial ?1 f-type terminal

AM Aerial ?2 screw type terminals


Pre-amplifier  8 phono sockets


CD engine  Focus system: triple beam laser pick up

Conversion technology: Delta Sigma


Tuner range  USA: FM 87.5 to 108.5MHz, AM 530 to 1730kHz,

Japan: FM 77.5 to 108.5MHz, AM 530 to 1730kHz

Europe: FM 87.5 to 108.5MHz, AM 522 to 1611kHz


Tuning resolution  FM TUNE mode: 50kHz

FM SCAN mode: 100kHz

AM TUNE mode: 1kHz

AM SCAN mode: 10kHz (USA), 9KHz (Japan & Europe)


Presets  80 user definable presets


Signal strength  0 to 50 scale


Pre-amplifier inputs  Tape/Aux1/Aux2: ?0dBV (sensitivity)

100 ohms (input impedance)


Outputs  Tape output equal to all input levels

CD Digital output

Output impedance: 100 ohms

Preamp output: volume range ∞ to +10dB

Output impedance: 150 ohms


Headphone  Output impedance: <8 ohms

Output level: same as preamp output

Output current limit: 60mA

Load impedance: 8 ohms to 2 ohms


Power amplifier  Voltage gain 28.5dB


Power output  75 W RMS per channel into 4 ohms (nominal mains)


Multiroom  ACC socket: Allows connection of a Linn Knekt RCU (Remote Control Unit)

MAIN INPUT socket: Allows connection of balanced audio and communication between other Classiks or the Linn Knekt system

ROOM OUTPUT sockets 1-4: Allows connection of balanced audio and communication between other Classiks or the Linn Knekt system

IR-OUT sockets: Allows connection of an IR diode to allow control of other (non-Linn) equipment. 6mA constant current output. Modulation frequency can be varied from 20kHz to 450kHz
分享 转发
TOP
发新话题 回复该主题