JWang 在 2005-10-9 3:06:16 发表的内容
几点看法
1。Quad的功放大概很难使Apogee出好声。
2。Apogee从来没有做过有源的。在不同系列中，他们在底下加低音。但是我认为做到是很失败的。反之，Martin Logan是比较成功的。
3。Quad，Martin Logan是静电的，Magneplanar是尼龙平面振膜，但其高音喇叭是铝带的。Apogee是全铝带的。尽管看上去都是平板的。但其内部构造是很不同的。 |
Jwang兄，请不要误会，我将下列原文转贴的意思，只是澄清一下Apogee Duetta Signature的分音器的的确确有种型号是可以改变有源或无源的。
This is the information supplied in the Duetta Signature and DAX manual on how to rewire it for ordinary passive use, or active use in conjunction with the Apogee DAX.
You will need a Philips type screwdriver to remove the screws in the back plate, and a suitable size spanner or nut driver set to loosen the binding post connections, and heatshrink or electrical tape to insulate the spare connections to prevent a short circuit.
WOOFER MIDRANGE/TWEETER
Binding Posts RED BLACK RED BLACK
Standard Wiring (Passive crossover) Heavy gauge copper wire Grey & Black Purple Brown, Light gauge copper wire (thin)
Active Crossover Red Black Blue Brown
Changing from passive to active
Remove the four screws from the connection panels on the back of the speakers, pull panel away from speaker, the cloth cover will catch on the connections so gently pull it away.
1. Remove heavy gauge copper wire from Woofer RED binding post, and replace with unconnected Red wire. (You may need to remove heatshrink from the end first).
2. Remove Grey wire from Woofer BLACK binding post leaving just the Black wire.
3. Remove Purple wire from Midrange/Tweeter RED binding post and replace with Blue unconnected wire. (You may need to remove heatshrink from the end first).
4. Remove light gauge copper wire from Midrange/Tweeter BLACK binding post, leaving just the Brown wire.
5. Cover the exposed metal ends of the spare connections, light & heavy gauge copper wire, Grey and Purple wires with tape or heatshrink, and fold away carefully inside.
6. Replace the connection plate with the fixing screws.
Changing from active to passive
Remove the four screws from the connection panels on the back of the speakers, pull panel away from speaker, the cloth cover will catch on the connections so gently pull it away.
1. Remove Red wire from Woofer RED binding post, and replace with unconnected heavy gauge copper wire wire. (You may need to remove heatshrink from the end first).
2. Re-connect Grey wire to Woofer BLACK binding post, you will now have Grey & Black connected. (You may need to remove heatshrink from the end first).
3. Remove Blue wire connection from Midrange/Tweeter RED binding post and replace with Purple wire. (You may need to remove heatshrink from the end first).
4. Re-connect light gauge copper wire to Midrange/Tweeter BLACK binding post, you will now have Brown and the light gauge copper wire connected. (You may need to remove heatshrink from the end first).
5. Cover the exposed metal ends of the Red and Blue wires with tape or heatshrink, and fold away carefully inside.
6. Replace the connection plate with the fixing screws.
