图解装调多伦任 TD-295 MK-III 唱盘 (宝碟等近似结构者亦可参考) [复制链接]

小反 在 2004-9-14 12:34:42 发表的内容 玩唱机也是我的梦想啊！！

平有平玩，贵有贵玩。

一般唱机都不带唱放吧？

不带的，但有很多几百块的唱片其实质素不太差。

quanlong 在 2004-9-15 22:33:17 发表的内容 非常多谢威马兄耐心的讲课!有一点想讲讲<其实如果不动刻度环，在唱臂调到无重状态后，也可靠数刻度环上的小格来取得到读数，一格等如一克，总之以唱臂顶端中央位作为「零」的起始点就是。>>这样做误差较为大小小吧,多能仕都有了,小小的针压计应该叫他拥有也不过份嘛.

之前亦说过，如果先调唱臂无重状时调得越平，往后的读数就越准，根据经验，一般中下档，比入门级较好的唱盘，其原带唱臂，在头一步做得好，之后调出来的针压和 0.1 克电子针压计比较，相差不会太大，那么关键就变成不是针压有多准，而是用什么档次的唱头，唱头本身要求多高的精准度，这和唱头采用什么切割形式的针尖有关，例如万元级的 Lyra HELIKON，说明书上就清楚指示要用误差少於 +/- 0.02 克的电子针压计去量针压，这就说明，针尖切割越幼细锋利，对针压的敏感度越高。

非常多谢威马兄耐心的讲课!有一点想讲讲<其实如果不动刻度环，在唱臂调到无重状态后，也可靠数刻度环上的小格来取得到读数，一格等如一克，总之以唱臂顶端中央位作为「零」的起始点就是。>>这样做误差较为大小小吧,多能仕都有了,小小的针压计应该叫他拥有也不过份嘛.

JWang讲到威马兄''误导''之词有点那个.不要误会,我不喜欢做擦鞋仔的!我觉得似威马兄这样敢坦诚教予已经好难得,一般LP友很多都不知这些LP词句和方法,威马兄这样做已经另好多人爱亦好多人恨了.

不错不错,多谢指教

What can I say is this article not yet end, wait till I am free to continue or simply express your opinion, we are welcome and this would be great to have more master to share with us.

By the way, from my experience, for just a few thousands turntable, most user even not willing to invest just a bubble level, guess what feedback I got? A Shure stylus force gauge will be TOO expensive for a thousands dollar turntable, so here what I try to explain is how to setup a turntable to make it at least work poperly ( not best tuned sounding ) without further invest tools.

I also have a DIY digital stylus gauge which just cost few hundreds only, almost the same as yours, but think about the Shure one cost how much and still most saying expensive, plus most users only stuck with stock cheapy MM cartridge (notice my article title; for Thorens TD-295 or Pro-ject reference only) only.

However, as told, this article not end yet, and what you wanna express will be in the ending of this article.