simaio p5.3
Technical Specifications:
•Type:  Solid State 
•Configuration:  Dual Mono 
•Design:  Open Loop / Balanced Differential
•Single-ended inputs (RCA):  4 pairs 
•Balanced Inputs (XLR):  1 pair 
•Input Device Types:  J-FET 
•Input Impedance:  22,000 ohms 
•Input Sensitivity:  200mV - 4.0V RMS 
•Balanced Outputs (XLR):  1 Pair 
•Single-Ended Outputs (RCA):  2 Pairs (fixed & variable) 
•Output Impedance - XLR / RCA:  100 / 50 ohms
•Gain Control:  M-eVOL 
•Gain:  9dB 
•Signal-to-noise Ratio:  109dB @ full output
•Maximum Output Voltage - XLR / RCA:  12 / 6 Volts 
•Frequency Response  5Hz - 100kHz:   (+0 / -0.1dB) 
•Crosstalk @ 1kHz:  < -110dB 
•IMD:  unmeasurable 
•THD   (20Hz - 20kHz):  < 0.002%  
  
Custom Installation Features:
•12 Volt Trigger Output Operation:  Direct Logic (0V = off, 12V=on) using a 3.5mm mono microphone jack with a 1000 ohms input impedance of and current requirement of 12mA.
•IR input: 1/8" mini-jack
 
General Specifications:
•Available Faceplate Finishes:  Black and Silver 
•Remote Control:  All-Aluminum Full Function
•AC Power Requirements:  240V / 50Hz (120V / 60Hz)
•Power Consumption idle:  6 watts
•Fuse Replacement - 230V  0.1A slow blow 
•Fuse Replacement - 120V  0.2A slow blow   
•Shipping Weight:  11 kg / 25 lbs 
•Dimensions (W x H x D):  43.2 x 10.0 x 38.8 cm. (17.0 x 3.9 x 15.3 in.)
 
Optional Phono Section Specifications:     
•Input Impedance - Adjustable:  100 Ω and 47K Ω 
•Input Capacitance - Adjustable:  0pF and 100pF 
•Gain - Adjustable:  40dB and 60dB 
•Input overload @ 40dB gain:  58mV RMS 
•Input overload @ 60dB gain:  3mV RMS 
•Signal-to-noise Ratio   (full scale @ 40dB gain):  107dBr 
•Signal-to-noise Ratio   (full scale @ 60dB gain):  85dBr 
•Frequency Response:  20Hz - 20kHz   (±0.5dB) 
•Crosstalk @ 1kHz:  -97dB 
•IMD:  < 0.009% 
•THD (20Hz - 20kHz):  < 0.001%